Linsn RV801 led receiving card work with TS801 led sending card, receiving the data from led sending card.
Function: Receiving signals from led sending card, then fed to the LED Display.
Power: 5-16V, 2A
RV801D works with all sending cards(TS801D, DS801, TS802, DS802).
One RV801D can max support 256 pixels height.
The max width one RV801 can support is depended on the setting of refresh rate, gray scale, and the scan clock of LED Panel Driver.
RV801D has 16 groups of RGB signal.
By using a Hub card, RV801 feds the right signals to LED Display Moudle.
By point correction support single point, 2X2 points, 4X4 points and 8X8 point four correction mode, the biggest calibration 6144 points/module, red, green, blue each level of 256;By card (cabinet) used to display the between the correction of off color correction, red, green, blue each level of 256.
Full color 4096(4K) gray level 180HZ refresh rate,max controls 512*128,twice than the sixth generation product,full color static 16384(16k)gray level 300HZ,max controls 160*64(note:need driving board can be on high 30MHZ clock)